GIGABYTE announced AORUS C700 GLASS, the first uniquely designed under the image of AORUS. The tower supports a maximum E-ATX motherboard, 420mm liquid cooling system, up to ten 2.5″ of SSD and a total of eight 120mm fan system for optimal performance and thermal solution.
AORUS C700 GLASS arrogate the translucent black on both tempered glass sides, the special processing of AORUS design located on the left side that can be further synchronized with other RGB lightning. In addition, GIGABYTE also offers RGB FUSION 2.0 driver to allow gamers to synchronize various RGB lightning effects to enhance the gaming experience. AORUS C700 GLASS supports both vertical and horizontal GPU installation, speaking about being flexible to allow the gamers to place the GPU at. The case panels can be removed easily without requiring tools and highly suitable if any further component upgrade process takes place. In terms of PSU placement, users can assemble the PSU with the mounting plate then push the PSU into the case from the rear side, further allows the user to install the PSU easily with minimal amount of effort.
AORUS C700 GLASS were built to fit the top-tier performance and expansion requirements. Out of the box, the tower features a pre-installed 120mm PWM fans on the front and two 120mm ARGB fans at the rear. The pre-built airflow allows for the users to proceed installing other components without requiring to install extra fans. In addition, the liquid cooling system can be installed with a maximum of 420mm radiator at the top, 360mm at the front and 140mm at the back. The tower can support up to 6 sets of 2.5″ SSD and 4 sets of 3.5″ HDD installation spaces. The tower also allows swapping between 3.5″ HDD with 2.5″ SSD, which total up to ten 2.5″ SSD storage installation.
The tower also features a built-in ARGB and PWM hub controller, provided three 5v 3pin ARGB connectors and five PWM connectors to allow the users to install extra RGB strips and expand more thermal fans. AORUS C700 GLASS equipped with four USB 3.0, a 20GB/s USB 3.1 Gen2 Type-C port, an HDMI, an audio port, RGB buttons and fan spin-control buttons. Gamers also take can take advantage of routing the cables over the PSU shroud. Also, there is a cable management space in the left and right cabin to route the cables which further providing a good visual experience from the RGB’s within the tower.